無錫科達腳手架廠【官網】主營:腳手架、移動腳手架、門式腳手架、梯形腳手架

無錫科達腳手架廠

示例圖片三
網站首頁 > 新聞資訊 > 行業知識

廠家解讀門式腳手架的規范標準【國標】

2018-11-14 14:46:22 無錫科達腳手架廠 閱讀

門式腳手架行業當中,門式腳手架是應用最為多的一種,也是備受大家歡迎的一種。門式腳手架的規范標準情況怎么樣呢?在搭設之后驗收不可少,這是非常重要的一項,否則不可靠的移動腳手架搭設,可能會造成人身財產等方面的損失,還需要格外當心了,盡量避免了。高度在20m及20m以下的移動腳手架,由單位工程負責人組織技術安全人員進行檢查驗收;高度大于20m的腳手架,由工程處技術負責人隨工程進度分階段組織單位工程負責人及有關的技術安全人員進行檢查驗收。

In the portal scaffolding industry, portal scaffolding is one of the most widely used and popular. What is the standard condition of portal scaffolds? Acceptance is indispensable after erection, which is a very important one. Otherwise, unreliable mobile scaffolding erection may cause personal and property losses, but also need to be extra careful to avoid as far as possible. Scaffolds with height below 20m and 20m shall be inspected and checked by the technical safety personnel in charge of the unit project; scaffolds with height above 20m shall be inspected and checked by the technical personnel in charge of the unit project and relevant technical safety personnel in stages according to the progress of the project. 門式腳手架驗收時應具備下列文件:必要的施工設計文件及組裝圖;腳手架部件的出廠合格證或質量分級合格標志;腳手架工程的施工記錄及質量檢查記錄;移動腳手架搭設的重大問題及處理記錄;移動腳手架工程的施工驗收報告。

When accepting portal scaffolding, the following documents should be provided: necessary construction design documents and assembly drawings; manufacturer's qualification certificate of scaffolding components or quality grading qualification marks; construction records and quality inspection records of scaffolding projects; major problems and treatment records of scaffolding erection; construction acceptance reports of scaffolding projects.

門式腳手架工程的驗收,除查驗有關文件外,還應進行現場抽查。

In addition to checking relevant documents, the acceptance of portal scaffold works should be carried out on-site spot checks.

抽查應著重以下各項,并記人施工驗收報告:安全措施的桿件是否齊全,扣件是否緊固、合格;安全網的張掛及扶手的設置是否齊全;基礎是否平整堅實;連墻桿的設置有否遺漏,是否齊全并符合要求;垂直度及水平度是否合格。

Spot check should focus on the following items, and record the construction acceptance report: whether the rods of safety measures are complete, whether fasteners are tightened and qualified; whether the safety net and handrails are set up completely; whether the foundation is smooth and solid; whether the connecting rods are set up missing, whether they are complete and meet the requirements; whether the vertical and horizontal degrees are in line with the requirements; Ge.

門式門式腳手架的水平度:底步門式腳手架沿墻的縱向水平偏差應L/600(L為梯形腳手架的長度)。門式梯形腳手架搭設尺寸允許偏差:腳手架的垂直度:腳手架沿墻面縱向的垂直偏差應H/400(H為腳手架高度)及50mm;腳手架的橫向垂直偏差H/600及50mm;每步架的縱向與橫向垂直度偏差應ho/600(h2為門架高度)。

Level of portal scaffolding: The vertical horizontal deviation of the bottom scaffolding along the wall should be L/600 (L is the length of the scaffolding). The allowable deviation of scaffolding dimensions: the vertical deviation of scaffolding: the vertical deviation of scaffolding along the wall should be H/400 (H is scaffolding height) and 50mm; the horizontal vertical deviation of scaffolding should be H/600 and 50mm; the vertical and horizontal deviation of each scaffold should be ho/600 (h2 is the height of the scaffold).

門式腳手架的規范標準目前國家已經有了一定的規定,大多數正規而專業的生產、出售或是租賃腳手架的公司,都有相關的規定,并會按照相關的要求去生產。在搭設的時候,也要按照規范來執行的。

At present, the standard of portal scaffolding has certain regulations in our country. Most of the companies that produce, sell or rent scaffolding regularly and professionally have relevant regulations and will produce scaffolding according to relevant requirements. In the course of erection, they should also be carried out according to the norms.



標簽:   腳手架 移動腳手架 門式腳手架 梯形腳手架 腳手架廠家
重庆幸运农场个人主页